PRODUCTS CENTER
The optical support phase change device is to freeze and shape the dart support, and then gradually heat up in the water bath, so that the support slowly expands back to the initial size, during which the camera can clearly capture the deformation process, so as to more accurately obtain the relationship between heating temperature, shape variable and time.
The radial support force tester is used to test the radial support force and resilience of various types of support. The device is small in size and simple in operation, and the force value repeatability is stable. The device is equipped with a 50lbs pressure sensor, and the mechanical friction inside the device cavity itself is less than 0.3N. The diameter, support force, pressure and radial force can be detected and a curve map can be formed. High data acquisition frequency.
The distal tip shrinking equipment places the front part of the guide wire that needs to be shrunk onto the outer tube and then on the holding platform, then heats through the heating module to evenly shrink the outer tube onto the guide wire.
Coating and curing equipment places products that need to be coated with glue/solution on the holding mechanism, and through the servo motor driving the platform to move up, down, left, and right, automatically completes the product’s coating and curing steps.